Home > Product > Hot Air Generator > Biomass Hot Air Generator
Split Type Hot Air Generator In Rubber Drying

Split Type Hot Air Generator In Rubber Drying

Split type hot air generator in rubber drying is specially designed for rubber industry. It use biomass gasifier burner and high efficiency heat exchanger to obtain clean hot air for drying. Because it can use wood chip, wood block and so on irregular fuel, the cost is greatly reduced. Energy saving, environmental protection, and no pollution, so be favored by most of customers.

Send Inquiry
Product Details

Split Type Hot Air Generator In Rubber Drying

1. Product Introduction of the split type hot air generator in rubber drying

Split type hot air generator in rubber drying is based on the rubber drying of Hainan, independently developed and designed and has been successful. It is produced heat by biomass gasifier burner, which is then exchanged to clean hot air for drying. The temperature requirement of natural rubber drying is about 130 degrees, and due to the large amount of hot air required for rubber drying, and no circulation of hot air, the hot air is required to be clean, therefore, the requirements for hot air generator are very high. The split type hot air generator combines our professional knowledge and practical experience. At the same time, its multi-function feeding system can accept wood chips, wood blocks, briquette, palm shells, coconut shells and irregular fuel, can saving 30 ~ 60% of fuel costs than the traditional fuels Oil/Gas/Electricity burners. It also has most advantages of energy saving, high efficiency, automatic operation, environmental protection and lower emission.

 

2. Product Parameter of the split type hot air generator in rubber drying

  


Production   Capacity

Production   Capacity

Production   Capacity

Production   Capacity

Production   Capacity

Production   Capacity

Production   Capacity

Rubber Drying   Capacity

1T/hr

1.5T/hr

2T/hr

2.5T/hr

3T/hr

3.5T/hr

4T/hr

Water Content(kg   )

428.57

542.8

857.41

1071.4

1285.7

1500

1714.28

Required Air   Capacity(m3)

21428.57

38142.8

42857.14

53571.4

64285.7

75000

85714.28

Required   Heating(Kcal)

462013.27

693019.85

924026.53

1155033.15

1386039.7

1617046.43

1848053.07

Wood Chips Consumption(kg)

189

283

378

472

566

660

755

Heat   Value(Kcal/hr)

3500

3500

3500

3500

3500

3500

3500

Heat Efficiency

70%

70%

70%

70%

70%

70%

70%

Airflow(m3)

7689

11533

15378

19000

23000

26900

30700

Air Pressure(Pa)

1600

1600

1700

1800

1950

2100

2300

Exhaust Gas   Flow(m3)

4320

6480

8460

10800

12960

15120

17280

Exhaust Gas   Pressure(Pa)

1900

2100

2100

2200

2300

2300

2300

Exhaust Fan   Capacity(KW)

5.5

7.5

11

15

18.5

22

37

Chimney   Height(mm)

15000

15000

15000

15000

15000

15000

15000

Chimney   Diameter(mm)

Φ350

Φ370

Φ400

Φ410

Φ430

Φ450

Φ500

Hot Air   Temperature(°C)

220

220

220

220

220

220

220

Exhaust Gas   Temperature(°C)

160

160

160

160

160

160

160

 

3. Product Feature of the wood fired hot air generator

1)       Full intelligent control system, automatic feeding, automatic temperature control, fault alarm, convenient operation.

2)       The furnace inside is made of 304 stainless steel 5mm thick profiles, and adopts the international top "multi-hearth, multi-return, full cold back" technology to improve efficiency.

3)       Heat exchange is accomplished efficiently in the furnace, hot air is directly sent into the heating space, the heating time is faster.

4)       Using the technology of international top "multi-hearth and multi-return", the heat transfer area can be increased in large quantity, so that the heat can stay in the furnace for longer, so as to achieve full heat exchange.

5)       Lower cost saving: because it can use wood chips, wood block and irregular fuel, the fuel cost is greatly reduced than oil/gas.

6)       Using the unique semi-gasification boiling combustion system, the ash content is 86% less than the traditional combustion method (direct combustion), no pollution problem.

7)       Pioneering new technology: using infrared radiation features of refractory materials, improving the furnace heat exchange, improve the uniformity of the temperature field and in the hearth, make the fuel burn more fully, improve the thermal efficiency, reduce energy consumption, save energy and prolong furnace inside part life.

 

4. Production Details of the split type hot air generator in rubber drying

 

blob.png


blob.png

 

5. Economic Analysis of the split type hot air generator in rubber drying

600,000kcal/hr hot air generator required for a variety of the economic benefits of energy in contrast.

The following is the cost comparison of various fuels: (RMB)

 

  

Fuel

0#Diesel

Natural gas

Electricity

Wood Chips

Heat value

10200kcal/kg

8500kcal/Nm3

860kcal/KWH

3500kcal/kg

Burner power(Example)

600,000kcal/hr




Need fuel quantity

67kgs

72Nm3

698kw

245kgs

Fuel price

8/kg

4.8/Nm3

1/kwh

0.5/kg

Heat conversion rate

88%

98%

100%

70%

Fuel cost(RMB)

536

346

698

123

Cost saving

413

223

575


Cost saving%

77%

64%

82%


 

6. Application of the split type hot air generator in rubber drying


blob.pngblob.png

 blob.png

 

 

7. Product Qualification of the split type hot air generator in rubber dryingblob.png

solid fuel fired hot air gernerator4356.png


 8. Shipping And Serving of the split type hot air generator in rubber drying


solid fuel fired hot air gernerator4462.png

9. FAQ

 1. Are you the real manufacturer?

 Yes, we are specializing in the design and manufacture of environmental protection equipment  manufacturers. 

 2. What kind of after-sales service do you have?

 Sale in a positive and serious attitude for the user installation , commissioning equipment and  provide technical training for users .

 3.,What are the payment methods?

 T/T, L/C, Western, Union.

 4. Is your price the final price?

 No, our equipment has many models. The price of each model is different. The price marked is the best  equipment price, the highest price will not be higher than the marked price.

 5. Do you undertake overseas agents?

 Yes, we very much welcome overseas customers to become agents of our equipment. As our agent, the  chamber of Commerce has great discount.

 

10. Last News


18-24生物质热风炉.jpg



Hot Tags: split type hot air generator in rubber drying, manufacturers, suppliers, customized, automatic, environmental, non-pollution, cost saving, energy saving, high efficiency
Related Products
Inquiry