Clean Energy Biomass Wood Chip Burner Machine
3 million Kcal Clean Energy Biomass Wood Chip Burner Machine connect to biomass manual boiler for a foam products factory
1. Factory site before
Original boiler working condition: original single drum vertical manual furnace DZL4-1.25 using bark, board wood, industrial wood waste with 30~40% water content
The problem that bother customer: frequent black smoke, high labor intensity, the boiler is messy; So the customer looking for urgent solution to solve the problems.
chain grate boiler costomer boiler room biomass fuel wood waste
2. The first transformation using other brand biomass burner
It’s too hurry to find good supplier of biomass burner, and of cheaper price of the machine, so the customer choose the wood chip burner produced in Fujian for the first.
The problem of the burner: the output power could not meet the continuous production of steam demand; manufacturers must use high-cost pellet and wood chips with very low moisture, and there was white smoke rose from the burner. Finally, the burner was broken.
cause black smoke-environmental pollution
3. Greenvinci Energy Saving Solution
Our engineer came to the sites to check and make analysis.
Analysis: The burner only uses one fan to supply air, the circuit control is relatively simple, and the heating surface of the burner is small (the heating space of the same model is only 50% of our product). There were many minor problems within one month after installation.
We make solution for the customer for the second transformation.
After detailed calculation, to use our 3 million kcal biomass gasifier burner. In the case of burning bark fully, can meet the pressure of more than 0.7Mpa, steam flow about 3 tons to meet customer production needs.
Solve the problem: No black smoke, improve the air environment ;
reduce 1 boiler operator, Reduce the burning amount of pellet and directly reduce steam costs.
Pictures after using Clean Energy Biomass Wood Chip Burner Machine:
Q&A
1. What’s the advantages compare with other suppliers?
(1) Professional air distribution design and control system--higher combustion efficiency
(2) Water-cooling automatic discharge system--24 hours working
(3) Remote PLC Control System
(4) Double frequency conversion
(5) Automatic feeding, no block.
(6) No tar (tar gasifier burning)
(7) Larger burning chamber--full combustion.
2. What kind of cooling system do you have?
Air-cooling for manual discharge burner and water-cooling for automatic discharge burner.
3. How about the thermal insulation effect of the burner?
We use refractory and thermal insulation materials such as aluminous firebrick, Insulating brick, heating preservation cotton and 310 stainless steel, which is of good insulation effect.
4. How about the after-sales service?
The main body of the machine is guaranteed for 1 year, the nozzle and grate for 6 months. Lifelong low-cost maintenance.
Hot Tags: clean energy biomass wood chip burner machine, manufacturers, suppliers, customized, automatic, environmental, non-pollution, cost saving, energy saving, high efficiency
