Introduction
The ceiling fan cover polishing machine is used for polishing and sanding for the items with small and medium sized round, conical shape, such as pot, plate, cup, cover etc. It has the advantages of reliable performance, high safety and high efficiency.
Specifications
No. | Item | Specifications |
1 | Size | 1800×1350×1650mm |
2 | Weight | 620 kg |
3 | Power | 7.2KW |
4 | Voltage | 380V 50Hz or custom |
5 | Application | Suitable for outside polishing of round items with diameter less than 200 mm |
6 | Capacity | 10-20S for one piece, depends on product size and polishing requirement . |
7 | Spares | Multi-leaf wheel, nylon wheel, sisal wheel, cloth wheel |
Structures
1. Machine body
Support polishing wheel, shield and motors
2. Wheel parts
Motor drives the polishing wheel. Can install sisal wheel, cloth wheel, multi-leaf wheel or nylon wheel.
3. Shield parts
Prevent objects from flying out to hurt worker during operation.
4. Workbench parts
push items into the polishing wheel under the action of the cylinder. After finishing polishing the workbench will send them out.
5. Electric control parts
PLC control. With both automatic and manual control.
6. Fixture parts
Clamp or loosen workpieces
7. Compensation parts
If the polishing wheel wears, can use wrench to pull the carriage to compensate.
Cases
 |  |
 |  |
Hot Tags: polishing machine for ceiling fan cover, manufacturers, suppliers, customized, automatic, environmental, non-pollution, cost saving, energy saving, high efficiency
